NOTE:
lfthis is the first lime
you
are
rlnning the cleaner. or if
you
have
chang€c
cleaning solution,
you
must degas
the solution lf not,
move
to
Sett/tg
Operatihg Paamelers.
Action
Degas for 5-10 minutes.
lf necessary, use SET/CLEAR
DISPLAY to alter this setting.
Default degas time is
5 minutes
NOTE: Reter to
17 for information on d
Pe.ameters
12 Oporating
Your
Cloener
The
cleaner
is now in Sel Time mode
with a
defaull lme of 60 mins. lf
necassary, use
SETi CLEAR DISPLAY
to alter this setting.
Press ON/OFF once to activate
limed
uMasonrcs.
To set the tank temperature,
press
SELECT
OPTION untilthe SET TEMP
LED lights.
Then
press
SET DISPLAY to alter
th€ setting until the
LED display
indicates the tank temperalure
you
wish io
maintain. Press ON/OFF once
to
activate
heat. The heat indicator
li
To monitor the solution temperature,
press
SELECT OPTION
untillhe SOLUTION
TEMP
LED
lghts The
LED drsplay
wll Indicate the
actua temoeralure of lhe so ulion.
To Next Page
Loading...
