EasyManua.ls Logo

Branson DC 315 - Potential Danger Related to Ultrasonics

Branson DC 315
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety First
2-5Digital Compact
BRANSON Ultrasonics Digital Compact Version 22.08.2002
2.4 Potential Danger Related to Ultrasonics
When working with ultrasonic equipment, please always observe the
following general warnings:
DANGER
Do NOT place hands between horn and part fixture. Danger of
contusion!
Never touch the horn when ultrasonics are applied. Danger of
burns!
DANGER OF FATAL INJURIES
NEVER work with the cover of the power supply units removed.
High Voltage! Danger of fatal injuries!
Ensure that no other person can be endangered by the above
dangerous situations. This could be the case if, in the course of
setup or maintenance work or similar, more than one person is
involved with working on the equipment.
CAUTION
Do NOT activate ultrasonics (i. e. press TEST key, press palm but-
tons or release external start signal) unless the RF cable and the
suitable converter are installed.
Make sure that a horn supplied with ultrasonic energy NEVER
contacts metal objects as this could result in destruction of the
unit.
The descriptions of the respective procedures will draw your attention
to further potential danger.
!

Table of Contents

Related product manuals