Troubleshooting
7-1
Digital Compact
2002 BRANSON Ultrasonics Digital Compact Version 22.08.2002
7 Troubleshooting
7.1 General Troubleshooting Procedures
In case of operating malfunctions of the power supply, please proceed
as follows:
1. Make sure the acoustic stack is properly assembled and installed.
2. Refer to the Error Elimination Tables. There you will find potential
causes and the respective remedies.
3. In case the problem seems to be in the ultrasonic power supply
module try out another module to verify your assumption.
4. If the mating surfaces of the acoustic stack need maintenance,
please refer to chapter 7.2.5.
CAUTION!
Power supply units of the DC series must not be serviced by other
than qualified technicians using test and repair equipment as well
as repair procedures and spare parts approved by BRANSON
Ultrasonics. In case of unauthorised attempts to repair or modify
the modules the warranty will terminate.
!
To Next Page
Loading...
