Description of the Unit
4-1
Digital Compact
2002 BRANSON Ultrasonics Digital Compact Version 22.08.2002
4 Description of the Unit
4.1 Digital Compact – Overview . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.2 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.3 Inputs and Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
4.4 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
4.5 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
4.6 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
4.7 Setting the Mode of Operation . . . . . . . . . . . . . . . . . . . . . 4-12
4.1 Digital Compact – Overview
The welding system includes the following basic components:
• Digital Compact Power Supply Module (DC)
•Converter
• RF Cable
• Booster of your choice
• Horn (customised)
The system does not include a programming unit for the welding cycles
or control of the solenoid valve. These control functions must be pro-
vided by an external programmable controller.
The DC power supply module generates the ultrasonic power output at
an operation frequency of 20, 30, or 40 kHz.
For more information, please refer to chapter 6.
4.2 Functions
• Autoseek
Used to seek the correct start frequency for the horn. This is done
by operating the horn at low-level amplitude (5%) to find and store
the frequency of the horn.
• Autotune with Memory (AT/M)
Enables the module
- to seek the horn frequency automatically, and
- store the frequency of the horn of the last weld.
To Next Page
Loading...
