13
CLEANING, CARE, STORAGE & MAINTENANCE
Cleaning
• Unplug the device first to avoid electric shock.
• Use wet cloth to clean the device and dry it.
• Remove the cover and drain from the hole at the bottom of the device.
• Do not soak the device in water and do not wash it directly.
• Do not use abrasive cleaning agents as these can damage the device.
Storage
• If the device will not be in use for a long time, please follow the steps:
• Turn o the power and remove the plug.
• Remove all the items stored in the device.
• Remove the cover and drain from the hole, wipe o excess water with a soft rag.
• Leave the lid slightly open to prevent odour formation.
• Put the device in a cool and dry place.
Defrosting
• Humidity can form frost in the interior of the cooling device or on the evaporator,
which will aect the cooling performance. Defrost the device regularly to avoid this.
• Switch o the device.
• Take out the contents of the device.
• Keep the lid open.
• Remove the cover and drain from the hole.
• Wipe o the defrosted water.
WARNING: Never use hard or sharp tools to remove ice or to loosen objects frozen in
place.