BRASS MONKEY GH2020 - Operation; How to Turn on the Fridge

7
OPERATION
How to Turn on the Fridge
1. Connect to power
2. Long press to power o and short press to power on.
3. The internal temperature will display and the compressor will start
4. SET: Press button to enter dierent modes, ECO (Energy Saving Mode), and MAX
(Fast Cooling Mode). Factory setting is Max
5. When the power is on and the dual temperature zone is set to valid, press the +
or - button to enter the big zone temperature setting, and then press the button
to switch the big or small zone temperature setting. Then press + or - to adjust the
temperature.
6. In the power on state, long press the button + and button for 3 seconds to turn
the big zone on or o, and press the buttons - and , for 3 seconds to turn the right
zone on or o.
NOTE: You cannot turn both zones o at the same time.