To Next PageTo Next PageWhy Braun BD 3001 doesn’t work on small areas?
If your Braun Hair Removal System doesn't work on small areas, it's likely because both skin tone sensors need to be in contact with the skin. If the area is too small or curved, the device can't get a valid skin tone reading and won't activate. Try repositioning the device to ensure both sensors are making contact.
How to fix Braun BD 3001 Hair Removal System if power bars do not light up?
If the power bars on your Braun Hair Removal System don't light up when the treatment window is on your skin, ensure the device is plugged into a working outlet and is in Ready mode. Also, make sure both skin tone sensors are fully touching your skin. Try adjusting the device's position to ensure both sensors make good skin contact.
What does it mean when power bars show unfamiliar pattern on Braun BD 3001?
If the power bars on your Braun Hair Removal System display a red LED along with white LEDs in an unusual pattern, it indicates a device error. Try disconnecting and reconnecting the power supply. If the error continues, contact a Braun Service Centre for repair.
Why is first LED on power bars flashing red on Braun Hair Removal System?
If the first LED on the power bars of your Braun Hair Removal System is flashing red, it means the removable treatment window reflector has been taken off. Replace the reflector to resolve this issue.
What to do if Braun Hair Removal System is broken?
If your Braun Hair Removal System is broken, cracked, or appears defective, do not use it, especially if the device or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using it.
Why all white LEDs flash on Braun Hair Removal System?
When all the white LEDs on your Braun Hair Removal System flash, it signifies that the product has reached the end of its lifetime. The maximum number of flashes (250,000) has been reached.
General| Brand | Braun |
|---|---|
| Model | BD 3001 |
| Category | Hair Removal System |
| Language | English |
Explains the meaning of warning symbols used in the manual.
Lists critical safety warnings related to device handling and modification.
Lists serious safety warnings regarding device operation and environment.
Illustrates and labels all parts of the device and accessories.
Details technical specifications like power, voltage, dimensions, and contents.
Details preparation steps, powering on, and skin tone detection.
Explains how to perform a patch test before the first treatment.
Explains continuous and basic modes for different treatment areas.
Describes the gentle mode for sensitive skin or first-time users.
Pre-treatment steps for facial areas, including patch test confirmation.
How to treat facial areas using precision mode.
Precautions for treating upper lip hair.
Expected reactions and advice for neck and jaw treatment.
Details the treatment schedule, post-treatment care, and sun protection.
Instructions for cleaning and storing the device.
Details common and rare skin reactions and how to manage them.
Information on warranty, repairs, and customer service.
Checks for wear, advice on issues, and general safety guidelines.
Information on how personal data is handled.
Details the components and features of the Braun Silk-expert device.
Explains the IPL technology and SensoAdapt™ system.
Lists conditions where the device should not be used.
Lists specific areas and conditions where the device should not be used.
Safety guidelines related to electricity and fire hazards.
Critical and general warnings about device usage, repairs, and power supply.
Covers area prep, device power-on, and automatic skin tone reading.
Guide for performing a skin patch test before initial treatment.
Instructions for using gliding and precision modes for different areas.
Explains gentle mode usage and device standby/sleep states.
Covers pre-treatment, facial area guides, and specific area advice.
Details treatment plan, after treatment advice, and maintenance.
Lists expected and unexpected skin reactions during/after treatment.
Guide to resolving common device operational problems.
Instructions for environmentally friendly disposal of the product.
Details the 2-year warranty terms and conditions.
