Why is the first LED flashing red on my Braun Silk-expert 5 BD 5001?
If the first LED on the power bars of your Braun Hair Removal System flashes red, it means the removable treatment window reflector has been detached. To fix this, simply replace the reflector.
What to do if my Braun Electric Shaver is broken or cracked?
If the Braun Electric Shaver appears broken, cracked, or defective, immediately stop using it. This is especially important if the device, the mains cord, or the power supply is damaged. If you're unsure about its safety or suspect any damage, do not use it.
What to do if Braun Epilator is broken?
If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
How to fix a Braun Epilator when the first LED flashes red?
If the first LED on the power bars of your Braun Epilator is flashing red, it means the removable treatment window reflector has been taken off. Replace the reflector to resolve the issue.
Why are all white LEDs flashing on my Braun Hair Removal System?
If all the white LEDs on your Braun Hair Removal System are flashing, it signifies that the product has reached the end of its life. The maximum number of flashes (120,000) has been reached.
How to reactivate Braun Hair Removal System if first LED flashes white?
If the first LED on the power bars of your Braun Hair Removal System is flashing white, the device has entered STANDBY mode. To reactivate it, simply press any button.
Why is the first LED on my Braun Epilator power bar red?
If only the first LED illuminates red on the power bar of your Braun Epilator, it indicates an invalid skin tone reading. This means your skin is either too light or too dark for the device to be safely activated.
What does it mean if my Braun Epilator shows a red LED with white LEDs?
If the power bars on your Braun Epilator display a red LED along with individual white LEDs, this indicates a device error. Try removing and then reconnecting the power supply. If the error continues, the device requires professional attention.
What to do if Braun Silk-expert 5 BD 5001 Hair Removal System doesn't work on small areas?
If your Braun Hair Removal System doesn’t work on small areas, it's likely because both skin tone sensors are not making contact with the skin. If the area you're trying to treat is too small or curved, the device may not be able to read a valid skin tone, preventing activation. Try repositioning the device to ensure both sensors are in contact with the skin.
How to fix Braun Silk-expert 5 BD 5001 when power bars do not light up?
If the power bars on your Braun Hair Removal System do not light up when the treatment window is placed on the skin, ensure the device is properly connected to an electrical outlet and is in Ready mode. Also, make sure that both skin tone sensors are making full contact with your skin. If necessary, adjust the device's position to ensure both sensors are in contact with the skin.
General| Purpose | Permanent hair reduction |
|---|---|
| Skin Tone Sensor | Yes |
| Skin Tone Adaptation | Yes |
| Hair Color Adaptation | Yes |
| Number of flashes | 400, 000 |
| Energy Levels | 10 |
| Intensity levels | 10 |
| Power Source | Corded |
| Warranty | 2 years |
| Attachments | Precision head |
| Type | IPL (Intense Pulsed Light) Hair Removal System |
| Technology | IPL (Intense Pulsed Light) |
| Treatment Areas | Face |
| Power Supply | AC Power |
| Pulse Modes | Single, continuous |
To Next Page
