Braun Silk-expert 5 BD 5001

Other manuals for Braun Silk-expert 5 BD 5001

Questions and Answers:

C
Chase GentrySep 1, 2025
How to fix Braun Silk-expert 5 BD 5001 when power bars do not light up?
- A
  Ashley WilsonSep 1, 2025
  If the power bars on your Braun Hair Removal System do not light up when the treatment window is placed on the skin, ensure the device is properly connected to an electrical outlet and is in Ready mode. Also, make sure that both skin tone sensors are making full contact with your skin. If necessary, adjust the device's position to ensure both sensors are in contact with the skin.
M
Melissa CooperAug 31, 2025
Why is only the first LED red on my Braun Electric Shaver?
- R
  robertgambleAug 31, 2025
  If the first LED illuminates red on the power bar of your Braun Electric Shaver, it means that the device has detected an invalid skin tone, indicating your skin is too dark. For safety reasons, the device cannot be activated in this condition.
E
Edward CainAug 30, 2025
Why is the first LED flashing red on my Braun Electric Shaver?
- M
  Melissa KingAug 30, 2025
  If the first LED on the power bars of your Braun Electric Shaver flashes red, it indicates that the removable front has been taken off. To resolve this, replace the removable front.
U
uadamsAug 29, 2025
What to do if the first LED flashes white on my Braun Electric Shaver?
- E
  edward33Aug 29, 2025
  If the first LED on the power bars of your Braun Electric Shaver flashes white, it means the device is in STANDBY mode. To reactivate it, simply press any button.
C
christopherfreemanAug 28, 2025
Why my Braun Epilator doesn’t work on small areas?
- N
  Natalie HarrisAug 28, 2025
  Your Braun Epilator may not work on small or curved areas because both skin tone sensors must contact the skin for the device to activate. Reposition the device to ensure both sensors make contact with the skin to enable operation.
J
Joseph AllenAug 27, 2025
What to do if my Braun Epilator is broken?
- M
  Michael LawsonAug 27, 2025
  If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
C
Carmen SmithAug 27, 2025
How to fix a Braun Epilator when the first LED flashes red?
- L
  lutzjoshuaAug 27, 2025
  If the first LED on the power bars of your Braun Epilator is flashing red, it means the removable treatment window reflector has been taken off. Replace the reflector to resolve the issue.
T
Tracy NelsonAug 25, 2025
What to do if Braun Epilator is broken?
- S
  Samantha PadillaAug 26, 2025
  If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
B
Brittany KirkAug 25, 2025
What to do if my Braun Electric Shaver is broken or cracked?
- R
  Riley HicksAug 25, 2025
  If the Braun Electric Shaver appears broken, cracked, or defective, immediately stop using it. This is especially important if the device, the mains cord, or the power supply is damaged. If you're unsure about its safety or suspect any damage, do not use it.

Braun Silk-expert 5 BD 5001 Specifications

General

Purpose	Permanent hair reduction
Skin Tone Sensor	Yes
Skin Tone Adaptation	Yes
Hair Color Adaptation	Yes
Number of flashes	400, 000
Energy Levels	10
Intensity levels	10
Power Source	Corded
Warranty	2 years
Attachments	Precision head
Type	IPL (Intense Pulsed Light) Hair Removal System
Technology	IPL (Intense Pulsed Light)
Treatment Areas	Face
Power Supply	AC Power
Pulse Modes	Single, continuous