What to do if Braun Hair Removal System shows an unfamiliar pattern of LEDs?
This indicates a device error. The device will not operate. Unplug the device and reconnect it. If the error persists, contact a Braun Service Centre for repair.
What to do if Braun Hair Removal System flashing sequence slows down?
The device is in heat-protection mode. To return to normal speed, allow the device to cool down.
What to do if center mode button light is flashing on Braun Hair Removal System?
The device is deactivated. Press any button to reactivate it.
What to do if first LED on power bars flashes red on Braun Hair Removal System?
This indicates that the head (10, 11, 12) has been taken off. Re-attach it.
What to do if power bars do not light up when using Braun Hair Removal System?
Make sure the device is connected to an electrical outlet. Press any button (4 or 5) to activate it. Ensure both skin tone sensors are in full contact with the skin. If needed, move the device in a way that both skin tone sensors get skin contact.
What to do if Braun Hair Removal System is broken or cracked?
Do not use the device if the handle, the base station, or the mains cord is damaged. If you are in any doubt about its safety or suspect it is damaged in any way, do not use it.
Why first LED illuminates red on Braun Hair Removal System?
This indicates an invalid skin tone reading. Your skin is either too light or too dark, and the device will not flash.
What does it mean if all white LEDs flash on Braun Hair Removal System?
This indicates the end of the product's lifetime. The maximum number of flashes (400,000) has been reached.
General| Intensity Levels | 10 |
|---|---|
| Warranty | 2 years |
| Technology | IPL (Intense Pulsed Light) |
| Treatment Modes | Gentle |
| Attachments | Precision Head |
| Power Source | Corded |
Ensure skin is hair-free, clean, and dry before starting treatment.
Connect to power, press a button, and the device auto-adapts light intensity.
Adjusts light intensity for sensitive areas or first-time users.
Test device on a small skin area for reaction before full treatment.
Explains GLIDING for large areas and STAMPING for small, hard-to-reach areas.
Overview of standard, wide, and precision heads for different body areas.
Instructions for treating facial hair, including upper lip and chin.
Guidance for pubic area hair removal using the device.
Recommended schedule including start-up and maintenance phases.
Post-treatment advice: sunscreen, avoiding irritants, and sun exposure.
Instructions for cleaning the device and its components and proper storage.
Details common side effects, how to assess them, and recommended reactions.
Common problems and their solutions for device operation.
Information on how to dispose of the device and its electronic waste.
Explanation of symbols used on the base station and device.
Detailed specifications including repetition rate, power, and dimensions.
Details on the 2-year product guarantee and how to obtain service.
To Next Page