How to fix Braun Epilator power bars not lighting up?
If the power bars on your Braun Epilator don't light up when the treatment window is against your skin, ensure the device is plugged into a working outlet. Press any button to activate the device. Make sure both skin tone sensors are fully touching your skin; adjust the device's position if needed to ensure proper contact.
How to use Braun Hair Removal System on small areas?
If your Braun Hair Removal System isn't working on small areas, use the precision head attachment. Ensure that both skin tone sensors are making contact with your skin.
What to do if the centre mode button light is flashing on my Braun Epilator?
If the centre mode button light is flashing on your Braun Epilator, it means the device is deactivated. Simply press any button to reactivate it.
Why is the first LED flashing red on my Braun Epilator?
If the first LED on the power bars of your Braun Epilator flashes red, it means the head has been detached. Re-attach the head to resolve the issue.
Why is my Braun Epilator flashing slowly?
If the flashing sequence slows down on your Braun Epilator, the device is likely in heat-protection mode. To restore normal speed, allow the device to cool down.
What does it mean when the first LED is red on my Braun Epilator?
If the first LED on the power bar of your Braun Epilator illuminates red, it indicates an invalid skin tone reading. This means your skin is either too light or too dark for the device to operate, and it will not flash.
What does the red and white LEDs pattern mean on my Braun Epilator?
If the power bars on your Braun Epilator display one red LED along with individual white LEDs, it indicates a device error. Unplug the device and then reconnect it. If the error continues, contact a Braun Service Centre for assistance.
Why are all the white LEDs flashing on my Braun Epilator?
If all the white LEDs are flashing on your Braun Epilator, it signifies the end of the product's lifetime. The maximum number of flashes (400,000) has been reached.
How to fix Braun Skin i-expert if power bars do not light up?
If the power bars on your Braun Hair Removal System aren't lighting up when the treatment window is on your skin, ensure the device is properly connected to a power outlet and activated by pressing any button. Also, make sure that both skin tone sensors are fully in contact with your skin. Adjust the device's position to ensure proper skin contact with both sensors.
Why does only the first LED illuminate red on my Braun Hair Removal System?
If only the first LED illuminates red on the power bar of your Braun Hair Removal System, it indicates an invalid skin tone reading. This means your skin is either too light or too dark for the device to operate, and it will not flash.
General| Number of Intensity Levels | 10 |
|---|---|
| Skin Tone Sensor | Yes |
| Precision Mode | Yes |
| Cordless Use | No |
| Hair Removal Technology | Intense Pulsed Light (IPL) |
| Attachments | Precision head |
| Power Source | Mains |
| Treatment Modes | Gentle |
Lists and describes the main parts of the Braun Skin i-expert device.
Explains the IPL technology and the function of SensoAdapt™™ skin tone sensors.
Details conditions and situations where the device should not be used due to potential risks.
Details additional medical and skin conditions that prohibit device use and potential side effects.
Lists specific areas and conditions where the device must not be used to avoid injury.
Provides critical instructions to protect eyes from the device's light during operation.
Outlines general safety measures regarding age, supervision, and potential risks.
Details safety procedures for power cords, device handling, and electrical hazards.
Highlights severe risks associated with device repair, water exposure, and electrical hazards.
Guides on preparing the skin area and powering on the device, including automatic light adaptation.
Explains how to adjust light intensity for sensitive areas and first-time users.
Details the recommended skin test before initial treatment to check for reactions.
Describes the GLIDING and STAMPING methods for effective hair removal.
Describes the standard, wide, and precision heads and their specific applications.
Provides specific instructions for treating the face, including precautions for sensitive areas.
Offers guidance for treating the pubic area, recommending the precision head and extra sensitive mode.
Outlines the recommended schedule for the start-up and maintenance phases of treatment.
Advises on post-treatment care, including sun protection and avoiding skin irritants.
Provides instructions on how to clean and store the device and its attachments safely.
Describes expected and adverse skin reactions and how to assess and react to them.
Helps resolve common issues such as power problems, device not flashing, or LED errors.
Provides guidance on the environmentally responsible disposal of the electronic device.
Explains the meaning of symbols marked on the device's base station.
Details the device's technical parameters, including repetition rate, power, and dimensions.
Lists EMC and Safety Standards with which the device complies.
Directs users to Annex 1 for information on spectral irradiance.
To Next Page