How to use Braun Silk expert Pro3 Hair Removal System on small areas?
To use your Braun Hair Removal System on small, hard-to-reach areas, use the precision head (if one is available for your model). Ensure that both skin tone sensors are in full contact with the skin in the area you are treating.
How to fix Braun Silk expert Pro3 if power bars do not light up?
First, ensure that your Braun Hair Removal System is properly connected to a working electrical outlet. Then, press any button on the device to activate it. Make sure that both skin tone sensors are in full contact with your skin. If the power bars still don't light up, try slightly adjusting the device's position to ensure both sensors are making consistent contact with your skin.
What to do if Braun Silk expert Pro3 is broken?
If your Braun Hair Removal System is broken, cracked, or appears defective, do NOT use it, especially if the handle, base station, or mains cord is damaged.
Why does only the first LED illuminate red on my Braun Hair Removal System?
If only the first LED illuminates red on the power bar of your Braun Hair Removal System, it indicates an invalid skin tone reading, meaning your skin is too dark for the device to operate safely. For safety reasons, the device will not flash in this condition.
What does it mean if my Braun Silk expert Pro3 power bars show a red and white LED pattern?
If the power bars on your Braun Hair Removal System display an unfamiliar pattern of one red LED shining along with individual white LEDs, this indicates a device error. Try unplugging the device and then reconnecting it. If the error persists, the device may require professional attention.
What to do if the center gentle mode light is flashing on Braun Silk expert Pro3?
If the center gentle mode light is flashing on your Braun Hair Removal System, it means the device is deactivated. Simply press any button to reactivate it.
Why is the first LED on the power bars flashing red on my Braun Silk expert Pro3?
If the first LED on the power bars of your Braun Hair Removal System is flashing red, it indicates that the head (10 or 11) has been removed. Re-attach the head to resolve this issue.
Why are all the white LEDs flashing on my Braun Silk expert Pro3 Hair Removal System?
When all the white LEDs on your Braun Hair Removal System are flashing, it signifies the end of the product's lifetime. This indicates that the maximum number of flashes (300,000) has been reached.
Lists and describes the components of the Braun Silk-expert Pro3 device.
Explains the IPL technology used by the device to inhibit hair growth.
Lists conditions and situations where the device should not be used for safety reasons.
Provides crucial advice and prohibitions for safe and effective device operation.
Advisories on potential side effects, hair color limitations, and treatment area restrictions.
Details the device's indication for permanent hair reduction and clinical trial results.
Specifies the device's purpose, suitable body areas, skin tones, and hair colors.
Explains the 'Gliding' and 'Stamping' methods for different treatment areas.
Instructions for device care, cleaning, and proper storage to maintain performance.
Guidance on using the device with different international power supplies.
Provides solutions for common problems encountered during device operation.
Explains the meaning of various symbols and markings found on the device.
Lists the detailed technical parameters and operating requirements of the device.
Provides contact information for customer support, helplines, and online resources.
General| Technology | IPL (Intense Pulsed Light) |
|---|---|
| Skin Tone Sensor | Yes |
| Flashes | 300, 000 flashes |
| Corded/Cordless | Corded |
| Body Attachment | Yes |
| Power Source | Mains |
| Warranty | 2 years |
| Treatment Modes | Normal, Gentle |
| Attachments | Precision head |
| Hair Color Compatibility | brown, black |
| Treatment Areas | Face, Body, Bikini line |
To Next Page