The customer hereby confirms this with his signature,
1. that he has received in full and in good condition the operating manual that belongs to the unit.
2. that he has been instructed that the operating manual contains exceptionally important
information (especially safety information) and has received instruction on the residual risks.
3. that he has been instructed that the unit may only be started up after having carefully studied the
operating manual.
4. that he has been instructed that the unit may only be used by trained, instructed and qualified
persons.
5. that he has been instructed that compliance with the operating manual does not relieve him of
the obligation to comply with the relevant applicable laws and regulations, especially regarding
use outside the EU. This also applies if extended requirements must be implemented due to the
corresponding changes in the laws and regulations and due to leading decisions.
6. a signed copy of this declaration is to be sent to BRAUN Maschinenbau GmbH.
_________________ ___________ _______________________ _____________________
Place Date Name in capitals Signature of the customer
Serial number: ________________________
Designation: ________________________
Year of construction: ________________________
To Next Page
Loading...