Braun LUV PERFEKT - Identification; Declaration of Conformity

4
1 Identification
1.1 Declaration of conformity
Within the meaning of EU Directive 2006/42/EC
The manufacturer,
BRAUN Maschinenbau GmbH
Albert - Einstein - Strasse 10
D – 76829 Landau i. d. Pfalz
Germany
hereby declares that the unit described below
Type of construction:
Year of
construction
:
Appropriate use:
Unit No.:
conforms with the stipulations of the standards listed below.
 EN ISO 12100 - Safety of machinery - General principles for design - Risk
assessment and risk reduction
 EN ISO13857 - Safety of machinery - Safety distances to prevent hazard
zones being reached by upper and lower limbs
 DIN EN ISO 4413 [2] - Hydraulic fluid power - General rules and safety
requirements for systems and their components
 EN 61310-2 - Safety of machinery: Indication, marking and actuation
 EN 614-1 - Safety of machinery: Ergonomic design principles
 EN 60204 - Safety of machinery: Electrical equipment of machines
 EN ISO 4254 - Agricultural machinery - Safety
 EN 349 (ISO 13854) - Safety of machinery: Minimum gaps to avoid crushing
of parts of the human body
This EC declaration of conformity loses its validity if
 the unit is converted, modified or used for a different purpose
without our explicit prior written approval.
 it is used contrary to the instructions in the operating manual.
Landau, 28/05/18
Place, Date
S. Braun, CEO
With overall responsibility