EasyManua.ls Logo

Braun ThermoScan IRT 6030 - Correct Probe Insertion and Measurement; ExacTemp Indicator and Position Errors; Successful Measurement Confirmation; Filter Ejection and Automatic Power Off

Braun ThermoScan IRT 6030
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
External factors may influence ear temperatures, including when an individual has:
Factor Yes affects
Poor probe placement
Used lens filter
Dirty lens
In the cases below, wait 20 minutes prior to taking a temperature.
Factor Yes affects
Extreme hot and cold room temperature
Hearing aid
Lying on pillow
Use the untreated ear if ear drops or other ear medications have been placed
in the ear canal.
Memory mode
Night light feature
15 sec
6030
The thermometer includes a convenient night light to illuminate
the display in a dim environment.
The light will turn on when you press any button. It will stay on
until the thermometer is inactive for up to 15 seconds even after
temperature is taken.
The last temperature taken is stored in its
memory and will be automatically displayed for 5
seconds when it is turned on again.
This thermometer is shipped with the Celsius (° C) temperature scale activated. If you wish
to switch to Fahrenheit (° F) and/or back from Fahrenheit to Celsius, proceed as follows:
Make sure the thermometer is turned off.
Press and hold down the Power button . After about 3 seconds
the display will show this sequence: ° C / SET / ° F / SET ...
1
2
Changing the temperature scale
Release the Power button when the desired temperature scale is shown.
There will be a short beep to confirm the new setting, then the thermometer is
turned off automatically.
3

Other manuals for Braun ThermoScan IRT 6030

Related product manuals