Braun ThermoScan User Manual

Calibration/verification of the Braun
ThermoScan device
A Welch Allyn authorized service center must perform individual module calibration and verification
activities.
NOTE: The tests are product specific.
Welch Allyn service test equipment and training is available. Contact Welch Allyn Customer
Service for information.
Braun ThermoScan display and error codes
Display Definition/Description Required action
Display indicates normal operation
after reading is taken.
None.
Display indicates normal operation
after device is turned off.
None.
Turn device on.
Display indicates reading stored in
memory.
None.
See manufacturer's instruction
guide.
Setting used to change the default
temperature scale.
See manufacturer's instruction
guide.
Calibration mode.
See manufacturer's instruction
guide.
Setting displays hours remaining
before anti-theft function of the device
is enabled and device is locked.
None.
See manufacturer's instruction
guide.
Anti-theft function of the device is
enabled; device is locked.
Return device to station for
unlocking.
See manufacturer's instruction
Page 1 of 5Calibration/verification
9/28/2010file://C:\Documents and Settin
g
s\
g
rahamw1\Local Settin
g
s\Tem
p
\~hhD427.htm

Braun ThermoScan Specifications

General

Measurement Technology	Infrared
Display	LCD
Probe Covers	Disposable
Power Source	2 AA batteries
Auto Shut-off	Yes
Accuracy	±0.2°C (±0.4°F)
Age Range	All ages, including newborns
Hygiene	Disposable probe covers to prevent contamination

Summary

Braun ThermoScan Calibration and Verification

Braun ThermoScan Display and Error Codes

Defines Braun ThermoScan display indicators and error codes, providing required actions for each.

Verification Setup

Details the necessary steps and equipment for setting up the Braun ThermoScan verification process.

Performing the Verification Test

Guides users through the steps of executing the calibration verification test using the Welch Allyn Service Tool.