EasyManua.ls Logo

Braun YK-81CEU - User Manual

Braun YK-81CEU
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
YK-81CEU
Pulse oximeter 1

Table of Contents

Questions and Answers

  • L
    Lucas GlassJul 29, 2025
    What to do if my Braun Medical Equipment displays a low battery?
    • B
      Briana GrantJul 29, 2025
      If the Braun Medical Equipment displays a low battery warning, it means the batteries need replacing. Please replace the batteries to resolve this issue.
  • L
    Lisa PatelAug 4, 2025
    Why does my Braun Medical Equipment keep turning off?
    • K
      Kyle SmithAug 4, 2025
      If your Braun Medical Equipment turns off, it could be due to two reasons: * The device automatically shuts off when no signal is detected within 8 seconds, which is normal. * The batteries may be low. Try replacing the batteries.
  • C
    Catherine VelezAug 10, 2025
    How to fix a Braun Medical Equipment oximeter that won't turn on?
    • R
      richard92Aug 10, 2025
      If the oximeter on your Braun Medical Equipment won't turn on, there could be a few reasons: 1. The batteries may be dead. Replace the batteries. 2. The batteries might be installed incorrectly. Reinstall the batteries, making sure they are correctly aligned. 3. The oximeter itself might be damaged. Please contact the customer service center.
  • J
    Jorge MarshallAug 16, 2025
    Why is the SpO2 or PR reading unsteady on my Braun Medical Equipment?
    • K
      Krystal CampbellAug 16, 2025
      If the SpO2 or PR reading on your Braun Medical Equipment is unsteady, it could be due to: * Your finger is not fully inserted into the device. Try reinserting your finger correctly. * You are moving or your finger is shaking. Remain as still as possible while taking the reading.
  • J
    Joshua BarronAug 22, 2025
    What to do if SpO2 or PR cannot be shown normally on Braun Medical Equipment?
    • P
      Phillip JosephAug 22, 2025
      If SpO2 or PR cannot be shown normally on your Braun Medical Equipment, this may be due to: * Your finger is not fully inserted into the device. Please retry by correctly inserting your finger. * Your oxyhemoglobin value is too low to be measured. Try a few more times. If you can make sure that there is no problem in the product, please go to the hospital in a timely manner for exact diagnosis.

Summary

Product Description

OLED Display Modes

Illustrates various display configurations for SpO2 and pulse rate readings on the OLED screen.

Indications for Use

Warnings and Precautions

Fingertip Pulse Oximeter

General Description

Explains the principle of oxygen saturation measurement using blood oxygen and hemoglobin.

How to Use Your Braun Pulse Oximeter

Installing and Replacing Batteries

Step-by-step guide for inserting and replacing the AAA batteries in the device.

Taking a Measurement

Instructions on how to correctly place the finger and obtain a reading.

Parameter Setup

Rotating the Display

How to change the orientation of the display for better visibility.

Care and Cleaning

Errors and Troubleshooting

Maintenance and Storage

Symbols and Definitions

Inquiry and Reporting

Box Content

Support Contact Numbers

Braun YK-81CEU Specifications

General IconGeneral
BrandBraun
ModelYK-81CEU
CategoryMedical Equipment
LanguageEnglish

Related product manuals