Need help?Do you have a question about the Braun Infusomat Space P and is the answer not in the manual?
General| Manufacturer | B. Braun |
|---|---|
| Model | Infusomat Space P |
| Device Type | Infusion Pump |
| Infusion Modes | Continuous, Intermittent |
| Volume to be Infused (VTBI) Range | 0.1 ml to 9999 ml |
| KVO Rate | 0.1 ml/h to 5 ml/h, selectable |
| Battery Type | Lithium-ion |
| Battery Life | Up to 8 hours |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Display | Color Graphic Display |
| Connectivity | RS232 |
| Alarms | Occlusion, Air-in-line, Low battery |
| Compatible with | SpaceStation |
| Certifications | CE |
Defines the specific medical applications and patient populations for which the Infusomat Space P is designed.
Details essential safety measures during pump operation, including positioning, inspection, and line management.
Covers safety requirements for pump installation in medical rooms and proximity to flammable substances.
Illustrates various screen displays and provides detailed explanations of their content and context.
Provides step-by-step instructions for correctly initiating an infusion therapy session with the pump.
Details the procedure for correctly inserting the infusion line into the pump's mechanism and sensors.
Explains the process of priming the infusion line and establishing the connection to the patient.
Describes how to input and calculate infusion rate, VTBI, and time parameters for therapy setup.
Details the methods for administering manual or pre-selected bolus doses of medication.
Guides on safely changing the infusion line and initiating a new therapy session.
Outlines the steps required to properly stop an ongoing infusion and conclude therapy.
Details how to modify infusion parameters without interrupting the ongoing therapy and reset status data.
Explains the different units used for dosing and the overview of dose rate calculation functionality.
Guides on performing dose rate calculations based on patient weight, height, and drug concentration.
Covers the management and use of the pump's drug library for storing and recalling therapy data.
Provides comprehensive instructions on setting up and administering Patient Controlled Analgesia.
Explains how to set up and administer secondary (piggyback) infusions alongside primary ones.
Details the Ramp and Taper mode for gradual increases and decreases in infusion rate over time.
Guides on initiating Ramp and Taper infusions either via the drug library or special functions menu.
Covers the Program Mode for delivering infusions with a series of defined intervals and parameters.
Details the steps to start infusions using the Program Mode, either from drug library or special functions.
Explains the Intermittent Mode, consisting of bolus and rate phases, for specific therapy delivery.
Guides on initiating Intermittent Mode therapies using the drug library or special functions menu.
Describes the Dose Over Time function for administering a specific dose within a set time frame.
Provides instructions on how to initiate a Dose Over Time therapy, including setting total dose and time.
Explains the workflow for accepting drug orders received wirelessly from EHR or SpaceStation.
Details how to adjust the occlusion pressure levels to prevent or manage infusion line occlusions.
Details the types of audible and optical alarm signals used by the pump, including LED indicators and staff call.
Explains actions to take in case of device-specific alarms, including troubleshooting steps.
Differentiates between pre-alarms and operating alarms, their causes, and user responses.
Lists common alarm messages, their potential causes, and recommended actions for resolution.
Explains the cyclical battery maintenance process and how users can replace the battery pack.
To Next Page