20
1.6 Standby Mode
In the case of extended interruption, the user has the option to maintain the set values.
•
Press sf to stop the infusion. Then press o for less than 3 sec.
•
Confirm that the pump is supposed to switch to standby by pressing u.
•
The pump is now in Standby.
While the pump is in the standby mode, it’s display shows the drug and the
remaining time for this mode. Change of remaining time by pressing
l.
Exit standby by pressing
c .
As long as a disposable is inserted in the pump will use standby also in case
o is
pressed for at least or more than 3 sec.
Chapter 1
SPECIAL FUNCTIONS
To Next Page
Loading...
Need help?
General
