46
Chapter 5
OPTIONS
In order to deactivate the function, select “Off” in the data lock, press k, enter
the code and press
k again.
5.4 Bolus Rate
• Open bolus rate in Options Menu with l.
•
Change bolus rate with q and confirm setting with k.
Note: Set bolus rate according to therapy requirements. Take care not to overdose!
Given a bolus rate of 1200 ml/h, e.g. 0.33 ml are reached within just one second.
5.5 KVO-Mode
The pump can continue the infusion with a preset KVO-rate after a preselected
VTBI/time has passed (see "Technical Data"). The duration of the KVO delivery is
selected in the service program.
•
Open the KVO-mode in the Options Menu with l.
•
Answer the Yes/No question with u to enable the KVO-mode.
5.6 Contrast / Display Light / Keypad Light
Contrast as well as display- and keypad light can be adjusted individually according to
the lighting conditions.
•
Open contrast/display light/keypad light in Options Menu by pressing l.
•
Choose between 9 contrast- and display light levels with l or r and confirm
with
k.
5.7 Alarm Volume
Chose between 9 different alarm volume levels.
•
Open alarm volume in Options Menu with l.
•
Set volume with l or r and confirm entry with k.
5.8 Date / Time
• Open date/time in the Options Menu with l.
•
Modify date and time with qand confirm the setting with k.
To Next Page
Loading...
