TROUBLE SHOOTING (continued)
31
The bread is
caved in
Make sure liquids are measured correctly. Next time, reduce
your liquids by 2 tablespoons. If you’re adding fruits or
vegetables, make sure they are well drained.
“H:E1” is
displayed and
flashing with a
beeping sound
The Breadman
®
is too hot (over 100°F/40°C) to begin
preparing another loaf. Unplug the machine, remove the
Bread Pan with your ingredients, and wait until the
Breadman
®
cools down — about 20 minutes — before
preparing a new loaf.
“H:E2” is
displayed and
flashing with a
beeping sound
The Breadman
®
has overheated. is too hot Unplug the
machine, remove the Bread Pan with your ingredients, and
wait until the Breadman
®
cools down — about 20 minutes.
If this error message occurs during the Baking Cycle, you
will have to discard the contents of the Bread Pan and
start again with new ingredients when the machine has
cooled down.
Symptom Possible Solutions
Display Window
shows nothing
Make sure the Breadman® is plugged in. Also, check the
power outlet. If there is no problem with the power outlet
and your unit is plugged in, contact Consumer Service for
advice or return the unit to place of purchase.
“E:S1” is
displayed and
flashing with a
beeping sound
The Breadman
®
Oven Sensor has short-circuited. Unplug
the machine and contact Consumer Service for advice or
return the unit to place of purchase.
To Next Page
Loading...
