Breville BAP009X - Understanding Your Air Purifier; Device Components and Controls; Filter Technology and Air Quality Monitoring

3
2
1. Filtered air outlet vent
2. Control panel
3. Filter separation plate
4. 360° air intake grille
5. 3-in-1 True HEPA lters
(activated carbon lter and pre-lter
included)
6. Back panel open/close lever
7. Back panel cover
8. Power cord
GET TO KNOW YOUR AIR PURIFIER
EN
CONTROL PANEL AND FEATURES
On/Off button
Turns unit on or off.
Night mode
Dims the display lights so you can sleep
comfortably.
Filter replacement indicator
Illuminates in red when it’s time to replace
your lter.
Timer
Sets a timer for 2, 4 or 8 hours
Fan speed settings
Adjusts the speeds between Auto, 1 (Low),
2, 3, and 4 (High).
FEATURES OF YOUR AIR PURIFIER
True HEPA lter
Your air purier features two True HEPA
lters which removes up to 99.97% of
airborne dust and pollen as small as 0.3
microns and helps reduce smoke, mould
spores and pet dander from the air passing
through the lter.
Pre-lter
The pre-lter captures large particles from
dust, hair, pet dander to help extend the
lter’s efciency and life.
Activated carbon lter
Designed to reduce and neutralize odors,
vapors and gases from cooking, smoke,
chemicals, pets, and other unwanted
scents.
Ioniser
This appliance has an ioniser feature which
releases negative ions into outgoing ltered
air to help the air purication process.
What are ions?
Ions are tiny particles that carry a positive
or negative charge. They exist naturally
around us in the air, water, and ground.
Both positive and negative ions are
colourless, odourless, and completely
harmless.
How does the ioniser work?
Negative ions help air purication by
attaching themselves to very small airborne
particles in the room. These particles take
on a negative charge and may join with
positively charged particles such as dust,
pollen, smoke, and pet dander to form
larger particles. The larger particles are
then more easily captured by the lter
system.
Important notes:
Your ioniser may produce an occasional
popping or cracking sound. This is normal
and occurs when a small buildup of ions is
discharged.
After extended use, you may notice dust
around the grilles or panels.
• This is caused by negative ions exiting
the air outlet, evidence of the ioniser’s air
cleaning effectiveness.
• You can remove the dust with a soft
brush or clean, damp cloth. Larger
particles may be attracted to positively
charged surfaces throughout the home,
like walls or oors.
• This may occur more frequently when
the lter is nearing the end of its useful
product life and unable to capture as
many charged particles.
• Excessive amounts of pet dander,
dust, or smoke may decrease the life
expectancy of the lters and interfere
with the ionisation process.
AIR QUALITY DISPLAY
PM2.5 Autosense technology actively
monitors the indoor air quality in the
room by measuring particulate matter. It
accurately detects and quickly responds to
even the slightest particle change in the air
and provides real-time PM2.5 feedback.
The air purier’s display will illuminate a
specic color based on whether the air
quality is “Good”, “Moderate”, or “Poor”.
When the unit is in auto mode, the
air purier automatically monitors the
air quality and adjusts the fan speed
accordingly to ensure healthy air quality
levels.
GOOD
Blue | 0 – 100
MODERATE
Yellow | 101 - 200
POOR
Red | 201 – 500
EN
BAP009X_21MLM2 (EMEA).indd 2-3BAP009X_21MLM2 (EMEA).indd 2-3 2022/1/27 3:16 PM2022/1/27 3:16 PM