How to fix too much coffee extracted from Breville Coffee Maker?
If you are extracting too much coffee from your Breville Coffee Maker, it could be because: * The coffee is ground too coarsely: Adjust the grind size slightly finer. Tamp then use the Razor™ dose trimming tool to trim off excess coffee. * The shot duration/volume needs to be reprogrammed.
How to fix not enough coffee extracted from Breville Dynamic Duo BEP920BSS Coffee Maker?
If you are not extracting enough coffee from your Breville Coffee Maker, it could be because: * The coffee is ground too finely: Adjust the grind size slightly coarser. Tamp then use the Razor™ dose trimming tool to trim off excess coffee. * The shot duration/ volume needs to be reprogrammed.
Why is the hot water light flashing on my Breville Dynamic Duo BEP920BSS Coffee Maker?
If the HOT WATER LED is flashing when you turn on your Breville Coffee Maker, it means the HOT WATER dial is OPEN. Turn the HOT WATER dial to the CLOSED position to resolve this.
General| Type | Espresso Machine |
|---|---|
| Material | Stainless Steel |
| Pressure | 15 Bar |
| Heating System | Thermojet |
| Model | BEP920BSS |
| Color | Brushed Stainless Steel |
| Water Tank Capacity | 2.5L |
| Power | 1600 watts |
| Voltage | 220-240V |
| Warranty | 2 years repair, replacement or refund (at the sole discretion of Breville) |
To Next Page