WARRANTY AND SERVICE
Limited Warranty
This product is warranted by BridgeCom Systems, Inc. to be free of defects in materials and
workmanship for a period of two years from the date of purchase. If a defective part causes
this product to operate improperly during the two-year warranty period, we will service it to the
original owner free of charge if shipped to BridgeCom Systems at the owner’s expense. This
warranty does not apply to any parts damaged due to improper use or violation of instructions.
It does not extend to damage incurred by misuse or abuse, unauthorized modifications, natural
causes such as lightning, fire, floods, and other such catastrophes; nor to damage caused by
environmental extremes, such as power surges and/or transients, theft, or accidents.
All warranties must be performed at BridgeCom Systems, Inc. No credit will be given for
unauthorized repair work attempted by the customer.
BridgeCom Systems, Inc. will repair or replace the equipment and return to the customer
freight pre-paid, within the continental United States. Equipment found not to be defective will
be returned at the customer’s expense, and it will include the cost to ship, test, and return the
equipment.
Equipment returned for repair must have a return merchandise authorization (RMA) number.
To obtain an RMA contact our Technical Support Department at (816)-532-8451 or email
techsupport@BridgeComSystems.com
. All returned equipment must have the RMA number
listed on the outside of the shipping container.
Ship all returns to BridgeCom Systems, Inc. 617 Liberty Rd. Smithville, MO 64089 Attn:Repair
Out of warranty repairs and service charges are billed at the current hourly rate plus parts.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
This document contains information proprietary to Bridge Embedded Systems,
Inc. and BridgeCom Systems, Inc. Its contents may not be reproduced, in
whole or in part, without express written permission from either Bridge
Embedded Systems, Inc. or BridgeCom Systems, Inc.. The information is
provided “AS IS” without warranty of any kind, either expressed or implied.
Bridge Embedded Systems, Inc. or BridgeCom Systems, Inc. does not assume
any liability for damages. Technical information and specifications in this
document are subject to change without notice.
32
To Next Page
Loading...