BRIG E340 - Boat Technical Specs; Dimensions and Parameters; Engine Power and Load

— 10 — "BRIG" inflatable boats
TECNICAL SPECIFICATIONS.
The basic parameters and dimensions of the boats E340 (E340H) and E380 (E3800H) comply with the data specified in the
following table. All dimensions measurments indicated have a tolerance of +/- 3%, weight measurments indicated have a
tolerance of +/- 5%.
3.40 m
1.78 m
1.12 m
0.46 m
2.09 m
0.83 m
16°
18.5°
500mm
3
0.15bar / 2.2 psi
4
25HP / 18.4kW
35HP / 25.7kW
100kg
20" (Long)
33L
180kg
600kg
285kg
485kg
480kg
780kg
Parameter E340 (E340H) E380 (E380H)
Length (without engine)
Width
Height (without engine)
Inflatable tube diameter, max.
Cockpit dimensions:
- length
- width
Deadrise angle on transom
Deadrise angle in middle section
Transom height
Number of independent air-tight chambers
Nominal air pressure in the tube
Passengers capacity
Recommended engine power
Maximum engine power*
Maximum engine weight
Engine shaft length
Built-in fuel tank capacity
Weight of empty boat (without fuel and engine)
Maximum load capacity of empty boat(ISO method)
Displacement in Light Craft Condition (LCC)
Maximum total load (ML)
Maximum transportable mass
Loaded displacement mass
* When the boat is fitted with an engine with maximum recommended power it must be use with extreme care.
This application is directed at experienced users using their boats for very specific purposes.
3.83 m
1.93 m
1.15 m
0.46 m
2.43 m
0.84 m
18°
19°
500mm
3
0.15bar / 2.2 psi
5
40HP / 29.4kW
50HP / 36.7kW
120kg
20" (Long)
43L
210kg
700kg
355kg
555kg
535kg
910kg