Briggs & Stratton FORTRESS Series User Manual

15

Roof Removal
1. Remove the screws (A) that secure the roof to the unit.
2. Carefully lift and remove the roof from the unit.
Front Panel Removal
1. Remove the two screws (A) that secure the panel to the
unit.
2. If installed (for wind rated regions), remove the two
screws (B) that secure the panel to the base.
3. Lift and flex panel outward and off of the base. Use
caution not to damage the battery box.
Not for
Reproduction

Briggs & Stratton FORTRESS Series Specifications

General

Brand	Briggs & Stratton
Model	FORTRESS Series
Category	Inverter
Language	English