Brigon 500 NT - Rotary Switch Position Menu; Menu Setup; Menu Pressure (Tightness Test); Menu Report

BRIGON 500 NT Page 9
Rotary switch position Menu
SETUP
PRESSURE
REPORT
DISPLAY
SERVICE
To use your analyser effectively there are various measuring programs at
your disposal. Pressing the buttons you can switch between the
menu functions and confirm with the button.
Menu Setup
SET FUEL
EXIT
LANGUAGE
SET DATE
SET TIME
N<-C-G
In SET FUEL you can choose fuel type.
Pressing EXIT you finish SETUP function.
In LANGUAGE you can choose different country settings.
In SET DATE you can set date.
In SET TIME you can set time.
In N<-C->G setting you can switch between various stack loss or
combustion efficiency calculation modes. Standard in Germany is N (nett).
Menu Pressure (tightness test)
SMOOTH
EXIT
TIME
PS.UNITS
RESOLVE
SMOOTH ON or OFF:
Pressing EXIT you finish this function.
TIME: Pressure sensor stabilisation time TIME 01 and TIME 02
in minutes.
PS.UNITS: hPa, mmHg, PSI, kPa, Pa, mmH
2
O, mbar, inH
2
O
RESOLVE: Resolution HIGH or LOW: Resolution of readings
Menu Report
COMB´N
EXIT
ROOM CO
TEMP
TIGHTN´S
PRESSURE
You can choose the required report:
COMB´N = Combustion test
ROOM CO = CO in ambient air
TIGHTN´S = Tightness test
TEMP = Differential temperature test
PRESSURE = Pressure test
DISPLAY shows you the stored readings. The analyser displays cell
number in the top line e.g. LOG 01.