18
7.5 Setting the water temperature
In the current mode, press the up or down arrows to set the water temperature, even if the heat pump is off.
7.6 Setting the locking function
Press the up and down arrow simultaneously to lock the setting. To unlock the setting, press the arrows again
simultaneously.
7.7 Setting the clock
Press the button to set the clock and use the up and down arrows to select the values.
To save this setting, press the
button again
7.8 Setting the activation of the timer
Press the button to set the time for switching on the heat pump and press the up or down arrow to set the
interval timing. To save this setting, press the
button again. If the LED of this button is on, then press
the
button to cancel the setting of the timer.
7.9 Setting the deactivation of the timer
Press the button to set the time for switching off the heat pump. Press the up and down arrows to set the
time for the switch-off and press the
button to save this setting. If the LED of this button is on, then
press the
button to cancel the setting of the timer.
EN
To Next Page
