Brinkmann 4655 - GRILL ASSEMBLY STEPS: CART CONSTRUCTION; STEP 1: ASSEMBLE CART SHELF AND RIGHT PANEL; STEP 2: ASSEMBLE CART SHELF AND LEFT PANEL

Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay cardboard
down to protect grill finish and
assembly area.
CAUTION! Some parts may
contain sharp edges.
Wear protective gloves
if necessary.
Step 1
Assemble bottom cart shelf and right
side cart panel assembly by using
four M6 X 60mm bolts (hand tighten
only at this point).
Step 2
Assemble bottom cart shelf and left
side cart panel assembly by using
four M6 X 60mm bolts. Tighten all
eight M6 X 60mm bolts at this time.
23