BRINKS BHS 2000A - User Programmable Features; Access Codes and User Types; Bypass and Motion Off Settings

User type programmable features
Auxiliary User Code 1 to 6.
Access Code #1 = Location 192 to 195
Access Code #2 = Location 196 to 199
Access Code #3 = Location 200 to 203
Access Code #4 = Location 204 to 207
Access Code US = Location 208 to 211
Access Code #6 ** Location 212 to 215
Access Code #7 = Installers Test Code. Location 216 to 219
.
AcceMCodeS'l 1 = Downloader (Prism II) Answer code. Location 232 to 235.
MOTION OFF
Standard Bypass - Bypasses predetermined zones in a single
selections. ,
Standard Bypass Zones 1-4 = Location 188.
Standard Bypass Zones 5-8 = Location 189.
user sequence. Use table below for
Bypass Enable - Used to se!ec, zones which can be individually' bypassed by user. 24 hour Are zones
should not be programmed as bypassable. Use table below for selections.
Bypass Enable Zones i-4 = Location 154
Bypass Enable Zones 5-8 = Location 155
Special Bypass Zones - Programs zones which are armed and disarmed using the 8th Access code.
Special Bypass Zones 1-4 = Location 190
Special Bypass Zones 5-8 = Location 191
Table for zone selection
Zone 1-4
Zone 4 8
Zone 3 4
Zone 2 2
Zone 1 1
Zone 5-8
Zone 8 8
Zone 7 4
Zone 6 2
Zone 5 1
26