BRINKS BHS 2000A - Programming Overview; Timers and Alarm Time Settings; Hexadecimal Time Programming

Programming Overview
Timers and Alarm times:
Fire Alarm -1-14 minutes. 15-continuous. 0 - d isable. Location 187.
Police Alarm-0-15 minutes. 0- silent. Location 186.
Exit time - 0 - 255 seconds. Location 240 (L). Location 241 (H). See note below.
Entry time - 0 - 255 seconds. Location 242 (L). Location 243 (H). See note below.
Secondary exit time. 0 - 255 seconds. Location 244 (L). Location 245 (H). See note below.
Dialer delay time - 0 - 255 seconds Location 246 (L). Location 247 (H> See note below.
AC loss delay time - 0 - 255 minutes Location 248 (L). Location 249 (H). See note below.
Auto test report time - 0 - 255 days. Location 250 (L). Location 251 (H). See note below.
Test offset - 0 - 2S5 hours. 0 - immediate star,. Location 240 (L). Location 24. (H). See note
below.
Restoral time (loop) - 0 -15 minutes. Location 152.
Ring Count - 0 - 255 rings. Location 236 (L). Location 237 (H). See note below.
Ring Time - 0-255 seconds. Location 238 (L). Location 239 (H). See note below.
Programming the time in Hexadecimal
Divide the required time by 16. Enter the quotient into the higher numbered location (H). Enter die
remainder into the lower numbered location (L)
Example : 43 seconds required.
43/16 = 2 with a remainder of 11 .
2 is placed in the (H) location
11 is placed in the (L) location
TABLE OF COMMON TIMES
High (H)
0
0
0
1
2
3
5
8
15
Seconds
Low (L)
0
0
10
10
15
15
30
14
45
13
60
12
90
10
120
7
240
0
28