BRINKS BHS 2000A - Special Features; Smoke Detector Reset Feature; Kill and Resurrect Feature

1
New BHS-2000A features
Smoke detector reset feature- The Fire power is only reset when the unit is turned off after a Fire Alarm
zone has been violated. If the zone is still violated (shorted), the ACP will automatically reset the fire
power 30 minutes later. If the second attempt fails, the "Call Brinks" segment on the keypad is lit and the
trouble beep initiated. The panel will then report a trouble to the central station.
Kill and resurrect feature- (Kill panel bit) - This feature is used in the event of a non-paying client. If
activated, all functionality at the panel is disabled except for the local annunciation of a tripped fire zone.
Display on the keypad will read "Not Ready & Call 800...". Features such as the ring count, Answering
machine bypass, and auto test will remain functional. Panel can be resurrected remotely (PRISM) or by
reprogramming at the site (PGM-670).
6