3
Safety Information
WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling,
installing, and operating this filtration system.
• If the power cable is damaged, do not use. Contact Customer Service for a replacement.
• Avoid storing in an area exposed to intense sunlight as this can cause damage to components.
• Do not store or expose the device in temperatures lower than 32°F (0°C). The ideal temperature
range is 39°F - 100°F (4-38°C).
• The device must be installed or relocated by a professional technician due to the risk of electric
shock and product damage.
• The best working pressure of this device ranges from 0.1 to 0.4MPa. Install a pressure increasing or
decreasing device if the water pressure is lower or higher than this level.
• For use with municipal tap water only. Not for use with well or underground water.
• Do not place magnetic devices near the device as damage could occur.
• Do not place heavy objects on the device.
• Do not allow children near the device without adult supervision.
• When cutting o the power supply, do not pull the power cord as this could cause damage.
• Do not place combustible substances near the device. Keep away from heat sources and open
flames.
• Install this device near a floor drain.
• If the device is not used for long periods of time, shut o power and turn o the 3-way ball valve.
To Next Page
Loading...
Need help?
General
