BRIO G20-U User Manual

9
4. Install the faucet
A. Ensure that you have a faucet mounting hole in your sink or sink countertop for this faucet. If you do not, create
a mounting hole no less than 1 – 1.2 in. (26 – 30 mm).
B. Remove the washer (1) and lock nut (2) from the faucet. Ensure that you leave the O-ring (3) on the faucet.
C. Attach the two 2/8 in. quick connects (M) to the large faucet post (ltered water) and the short faucet post (tap
water).
3
1
2
M
M
D. Place the faucet into the mounting hole and secure in place underneath the sink with the washer (1) and lock
nut (2).
E. Connect two faucet tubings (K) to each of the 2/8 in. quick connects (M) underneath the sink.
M
1
2
K
K
M

BRIO G20-U Specifications

General

Brand	BRIO
Model	G20-U
Category	Water Filtration Systems
Language	English