EN | 7372 | EN
The identication plates are on the front of the appliances.
Once the end of use for the water
dispenser has been reached, it must be
dismantled and undergo environmen-
tally friendly disposal.
The dismantling and disposal is to
be carried out exclusively by per-
sonnel of the manufacturers or by
The pictogram with the crossed
out dustbin points to the require-
ment for separate disposal of
electrical and electronic appli-
ances (WEEE). Electrical and electron-
ic appliances can contain hazardous
and environmentally hazardous materi-
als. Do not dispose of this appliance as
IDENTIFICATION PL ATE
DISMANTLING AND DISPOSAL
WARNING!
Danger to life from improp-
er dismantling!
Errors in dismantling can lead to
life-threatening situations or sub-
stantial property and environmental
damage. This leads to risks, among
other things, from electrical current,
carbon dioxide or CO
2
bottle pres-
sure.
• The dismantling is exclusively to
be carried out by the manufacturer
or qualied persons.
• Consult the manufacturer, even in
the case of a change of location.
• Refrain from unauthorised disman-
tling and change of location.
domestic waste. Hand it in at a collection point for electrical and electronic waste.
The packing material is 100 % recyclable. The various parts must therefore be
disposed of responsibly and in full compliance with local authority regulations.
By doing so, you will help to conserve resources and protect the environment.
For further details, please consult your dealer or your local authorities.
To Next Page
