Reclining the PRINCE
page 8
Correct buckle position
Squeeze the recline bar and release
handle together. Then slide the base
into the required position. Let go of the
release handle and make sure that the
PRINCE has locked into place.
The PRINCE has a choice of three recline positions for your child‘s comfort. It can be used in either an upright,
reclined or sleeping position.
IMPORTANT
Each time you adjust the PRINCE, check that it is still
secure and that the seat-belt is tight. If there is any
slack in the seat-belt then re-tighten it before starting
your journey.
The position of the seat-belt/lap belt buckle can affect the stability of the PRINCE. In an accident this
could stop the PRINCE from protecting your child as well as it should.
If, when the seat-belt/lap belt is
properly tightened, the buckle lies in
the position marked as wrong (
) then
try fitting the PRINCE in another
seating position in your car.
REMEMBER -
Check that the PRINCE is secure
before each journey.
To Next Page
Loading...
