Vital information - Read now Page 1
Frequently asked questions
Page 1
Crucial parts of your child car seat Page 2
Stage 1 Preparing to install the PRINCE in the car
• Harness adjustment Page 3-4
• Forward anchorages Page 4
Stage 2
• Installing with a lap and diagonal seat-belt Page 5-6
• Installing with a lap-belt Page 7
• Reclining the PRINCE Page 8
• Correct buckle position Page 8
Fitting your child in the PRINCE
• Everyday use of the harness Page 9
Looking after the PRINCE
• Removing, cleaning and refitting the cover Page 10
• Cleaning the harness, chest pads and seat
Page 10
• Removing and cleaning the harness buckle Page 11
• Replacement cover Page 12
Important information - Read before your first journey Page 12
Final checklist Page 13
If in doubt Page 13
It is important that you read this User Guide BEFORE trying to install your child
car seat (surveys have revealed that 7 out of 10 car seats are not installed
correctly or being used properly - Source:RAC). This User Guide will take you
through each stage of using and caring for your child car seat. There are four
stages to follow which will make installing and caring for your child car seat
easier.
Stage 1
Stage 2
Stage 3
Stage 4
Contents
Thank you for choosing Britax
Please read this user guide. Failure to do so could endanger your child.
Preparing to install your child seat in the car
Installing your child seat in the car
- from 9kg to 18kg
Fitting your child seat in the car
- from 9kg to 18kg
Looking after your child car seat
Installing the PRINCE in the car
Stage 3
Stage 4
To Next Page
Loading...
