page 7
Have you adjusted the harness to the correct position for your child?
If not, see Stage 1 on page 3.
Installing with a lap belt
IMPORTANT - Do not use any load bearing contact points other than those described in the instructions and
marked in the child restraint.
Fasten the lap belt.
3
Place the PRINCE forward facing
on the car seat and pull the harness
tight.
1
Pass the lap belt through both side
slots.
2
The PRINCE should now be
secure - see buckle position on
page 8.
Before going any further make sure that the the lap belt passes below
both lap belt guides.
4
Lap belt
guide
Carefully kneel on the PRINCE to
push it into the car seat and pull the
lap belt tight.
5
Removing the PRINCE from the car
Simply unfasten the seat-belt.
Skeleton
view
6
To Next Page
Loading...
