Stage 3 - Fitting your child in the PRINCE
page 9
Everyday use of the harness
Have you checked the position of the ‘seat-belt’ buckle? If not see ‘Correct
buckle position’ on page 8.
Loosen the harness by pushing the adjuster button in
as you pull the shoulder straps forward as much as
possible.
Unfasten the buckle by pressing the red button (a) and
place your child in the seat. Fit the harness around your
child and fasten the buckle up (b).
1
Pull the adjuster strap forward making sure the harness
is a comfortable but FIRM fit around your child.
3
4
5
Finally, pull both chest pads down from your childs'
shoulders onto their chest.
2
Click!
(b)
(a)
Check that the harness is not twisted and pull the
harness up to tighten the lap sections which are
designed to fit low down on your child’s body.
REMEMBER -
The chest pads are an important
safety feature. Never use the
PRINCE without them.
To Next Page
Loading...
