BroadLink RM-PRO - Buttons and Indications; LED Indicators; Reset Button

3
Buttons and Indications
Button
Description
Reset Button
Insert a needle into the designated keyhole, press and hold for at least 6
seconds until the Blue Wi-Fi LED flashes quickly (about 2-3 times per
second).
LED
Status
Indication
Blue Wi-Fi LED
Flashes quickly (about 2-3 times per
second)
In configuration mode (the
Universal Remote is waiting to be
added to a network).
Flashes fast to slow then goes off
(during configuration)
Added to Wi-Fi network.
Flashes slowly (once per second)
No network connection. Please
check the network and re-
configure the device.
Orange
Operation LED
On (during button learning)
Waiting for buttons to be learned.
Please point the physical remote
to the Universal Remote and press
the physical button to learn.
Flash once (during button learning)
The button has been successfully
learned.