EasyManuals Logo

Brocade Communications Systems FastIron SX Series User Manual

Brocade Communications Systems FastIron SX Series
593 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #451 background imageLoading...
Page #451 background image
Displaying the Adj-RIB-Out for a neighbor
To display the current BGP4 Routing Information Base (Adj-RIB-Out) for a specic neighbor and a specic destination network, enter a
command such as the following at any level of the CLI.
device# show ip bgp neighbor 192.168.4.211 rib-out-routes 192.168.1.0/24
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
S:SUPPRESSED F:FILTERED s:STALE
Prefix Next Hop Metric LocPrf Weight Status
1 10.200.1.0/24 0.0.0.0 0 101 32768 BL
The Adj-RIB-Out contains the routes that the device either has most recently sent to the neighbor or is about to send to the neighbor.
Syntax: show ip bgp neighbor ip-addr rib-out-routes [ ip-addr/
prex ]
For information about the elds in this display, refer to Displaying summary route information on page 451. The elds in this display
also appear in the show ip bgp display.
Displaying peer group information
To display peer-group information, enter a command such as the following at the Privileged EXEC level of the CLI.
device# show ip bgp peer-group STR
1 BGP peer-group is STR
Address family : IPV4 Unicast
activate
Address family : IPV4 Multicast
no activate
Address family : IPV6 Unicast
no activate
Address family : IPV6 Multicast
no activate
Address family : VPNV4 Unicast
no activate
Address family : L2VPN VPLS
no activate
Members:
IP Address: 10.1.1.1, AS: 5
Syntax: show ip bgp peer-group [ peer-group-name ]
Only the parameters that have values
dierent from their defaults are listed.
Displaying summary route information
To display summary statistics for all the routes in the device’s BGP4 route table, enter a command such as the following at any level of
the CLI.
device# show ip bgp routes summary
Total number of BGP routes (NLRIs) Installed : 20
Distinct BGP destination networks : 20
Filtered BGP routes for soft reconfig : 100178
Routes originated by this router : 2
Routes selected as BEST routes : 19
BEST routes not installed in IP forwarding table : 1
Unreachable routes (no IGP route for NEXTHOP) : 1
IBGP routes selected as best routes : 0
EBGP routes selected as best routes : 17
Syntax: show ip bgp routes summary
Displaying BGP4 information
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 451

Table of Contents

Other manuals for Brocade Communications Systems FastIron SX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brocade Communications Systems FastIron SX Series and is the answer not in the manual?

Brocade Communications Systems FastIron SX Series Specifications

General IconGeneral
BrandBrocade Communications Systems
ModelFastIron SX Series
CategorySwitch
LanguageEnglish

Related product manuals