Need help?Do you have a question about the Brocade Communications Systems ICX 7250-24 and is the answer not in the manual?
How to contact Brocade Technical Support for product support.
Details the management interfaces available on each device.
Explains the LEDs that indicate the status of device components.
Details power supply usage and PoE/PoE+ port support for ICX 7250 models.
Provides general safety and environmental precautions for device installation.
Safety guidelines for lifting and handling the device during installation.
Safety guidelines related to power handling and electrical connections during installation.
Step-by-step guide for installing the device on a desktop or flat surface.
Overview of the Brocade EPS4000 external power supply and its function.
General safety and environmental precautions for EPS4000 installation.
Site requirements for installing the EPS4000 external power supply.
Instructions for installing the EPS4000 on a desktop or in an equipment rack.
Steps to power on the EPS4000 and connected devices.
Outlines the steps for configuring the device, including initial setup and management.
Steps to secure CLI access by assigning passwords.
Procedure to regain Super User access if the password is lost.
How to configure IP addresses and subnet masks for system management.
Detailed steps for configuring IP parameters on devices running Layer 3 software.
Steps to diagnose and resolve issues with network connections.
Configures and monitors device temperature thresholds and fan control.
Chart to help diagnose issues by interpreting switch indicator LEDs.
Troubleshooting steps for power and cooling issues, including checking temperature.
General caution statements alerting to potential hazards or damage.
Specific cautions regarding operating temperature and airflow.
Cautions related to power cord usage and circuit loading.
Warnings about potential lethal or extremely hazardous situations, including fan tray hazards.
Specific danger warnings related to power precautions and cord usage.
Warnings about rack stability and device placement due to weight.
Warning that all fiber-optic interfaces use Class 1 lasers.
General| Model | ICX 7250-24 |
|---|---|
| Product Series | ICX 7250 |
| Ports | 24 |
| Switching Capacity | 176 Gbps |
| MAC Address Table Size | 32, 000 |
| VLANs Supported | 4096 |
| Redundant Power Supply | Optional |
| Jumbo Frame Support | 9216 bytes |
| Power Supply | Internal (100-240V AC) |
| Dimensions (W x D x H) | 440 x 305 x 44 mm |
| Weight | 4.5 kg |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Management | Web, CLI, SNMP |
To Next Page
