Brocade Communications Systems ICX 7450 series Software Update

Changes in multicast parameter values (Continued)TABLE 3
Parameter Device FastIron 08.0.xx (minimum/
maximum/default)
FastIron 07.4.00 (minimum/maximum/
default)
MLD Groups FCX 256/8192/4096 256/32768/8192
ICX 6610 256/8192/4096 256/32768/8192
SX Gen2 256/8192/4096 256/32768/8192
SX Gen3 256/8192/4096 256/32768/8192
ICX 6450 256/8192/4096 256/32768/8192
ICX 6430 256/4096/1024 256/1024/256
Layer 3 Multicast
IGMP Groups FCX 1/8192/4096 256/8192/4096
ICX 6610 1/8192/4096 256/8192/4096
SX Gen2 1/8192/4096 256/8192/4096
SX Gen3 1/8192/4096 256/8192/4096
PIM (S,G) mcache FCX 256/6144/1024 256/4096/1024
ICX 6610 256/6144/1024 256/4096/1024
SX Gen3 256/6144/1024 256/4096/1024
MSDP SA cache FCX 1024/8192/4096 Not supported in FastIron 07.4.00
ICX 6610 1024/8192/4096 Not supported in FastIron 07.4.00
MLD Groups FCX 1/8192/4096 Not supported in FastIron 07.4.00
ICX 6610 1/8192/4096 Not supported in FastIron 07.4.00
SX Gen2 1/8192/4096 Not supported in FastIron 07.4.00
SX Gen3 1/8192/4096 Not supported in FastIron 07.4.00
PIM6 (S.G) mcache FCX 256/1024/512 Not supported in FastIron 07.4.00
ICX 6610 256/1024/512 Not supported in FastIron 07.4.00
SX Gen3 256/1800/1024 Not supported in FastIron 07.4.00
Appendix A: Changes Between Releases
38 FastIron Ethernet Switch Software Upgrade Guide
53-1003632-02

Brocade Communications Systems ICX 7450 series Specifications

General

Brand	Brocade Communications Systems
Model	ICX 7450 series
Category	Switch
Language	English