Brocade Communications Systems ICX 7450 series Software Update

New OSPFv3 commands (Continued)TABLE 8
Command Note
[no] active Sets active status. FastIron 07.4.00 behavior was always
active.
[no] hello-jitter Configures jitter between HELLO packets, in percentage
[no] suppress-linklsa Suppresses link LSA advertisements
Show commands
show ipv6 ospf summary Displays summary of IPv6 OSPF instances
show ipv6 ospf vrf Displays IPv6 OSPF information for a specific VRF interface or
all VRF interfaces
Clear commands
clear ipv6 ospf route Clears OSPF routes
clear ipv6 ospf vrf Clears all OSPF data, or clears data for a specific VRF
interface
Deprecated OSPFv3 commands TABLE 9
Command Note
Global level command (router OSPF and sub-command)
[no] virtual-link-if-address Configures the source address to use with virtual links
RIP
New RIP commands TABLE 10
Command Note
Global-level command (router RIP and sub-command)
[no] learn-default Enables learning RIP default routes
[no] poison-local-routes Advertises local routes with maximum metrics when they go down
Interface level commands
[no] ip rip learn-default Enables learning RIP default routes from this interface
RIP
FastIron Ethernet Switch Software Upgrade Guide 43
53-1003632-02

Brocade Communications Systems ICX 7450 series Specifications

General

Brand	Brocade Communications Systems
Model	ICX 7450 series
Category	Switch
Language	English