Brook WINGMAN CONVERTER - Page 10

Button Remap Settings
The following instructions are based on the Xbox One controller.
For those using other controller, please refer to the Corresponding
Buttons List.
Button Remap Settings
Buttons that can be remap include: A, В, X, Ү, LB, RB, LT, RT, LSB, RSB
(hereinafter referred to as ЕК)
Step 1. Enter setting mode:
Press MENU + Xbox Guide, the Device Red LED of the
Wingman 50 will be off.
Step 2. Choosing a FK button: (e.g. Setting X as A+B)
Press X
Step 3. Choosing button to be set:
Hold VIEW, then press А + B.
Step 4. Completing setting mode:
Release all buttons, then press MENU to save settings.
Step 5. Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman 5D
will be permanently оп.
Cancelling Button Remap Settings
Step 1. Enter setting mode:
Press MENU + Xbox Guide, the Device Red LED of the
Wingman 50 will be off.
Step 2. Erasing all settings for Button Remap Settings.
Press VIEW + MENU,
Step 3. Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman 5D
will be permanently on,