Brook WINGMAN CONVERTER - Page 9

Turbo Function Settings
The following instructions are based on the Xbox One controller.
For those using other controller, please refer to the Corresponding
Buttons List.
Turbo Function Settings
Buttons that can be set as Turbo function buttons include: A, B, X, Y,
LB, RB, LT, RT, LSB, RSB (hereinafter referred to as FK)
5tep 1. Enter setting mode:
Press VIEW + Xbox Guide, the Device Red LED of the
Wingman SD will be off.
Step 2. Choosing a FK button: (e.g. Setting A as turbo function)
Hold VIEW, then press A
Step 3. Completing Setting Mode:
Release all buttons, then press MENU to save settings.
Step 4. Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman 50
will be permanently оп.
Cancelling Turbo Function
Step 1. Enter setting mode:
Press VIEW + Xbox Guide, the Device Red LED of the
Wingman 5D will be off.
Step 2. Erasing all Turbo function buttons
Press VIEW + MENU
Step 3. Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman 5D
will be permanently on.