Brookfield Engineering Laboratories, Inc. Page 8 Manual No. M/92-021-N0902
I.7 Cleaning
Be sure to remove spindle from instrument prior to cleaning. Severe instrument
damage may result if cleaned in place.
Instrument and Keypad: Clean with dry, non-abrasive cloth. Do not use solvents
or cleaners.
Immersed Components (spindles): Spindles are made of stainless steel. Clean with non-abra-
sive cloth and solvent appropriate for sample material that
is not aggressive to immersed components.
When cleaning, do not apply excessive force which may result in bending spindles.
To Next Page
Loading...
