Brooks Automation
260301 Revision A 81
ATR60LF RFID Reader CAN Bus 8 Service and Troubleshooting
Product Manual 8.1 General
8 Service and Troubleshooting
This chapter gives you an overview of the following topics:
General
Qualified Troubleshooting Personnel
Safety Instructions
Error Codes
Error Display with LED
Reader Does Not Respond
Reset
Power Cut
Software Releases
Customer Service
8.1 General
Follow the Instructions Specified in the Safety Chapter
Follow the general safety information in the chapter Safety
Instructions.
The RFID reader and its components must be serviced by
Brooks only!
If errors occur, follow the instructions in this section. Do not
carry out any error eliminating measures other than the ones
described in this section!
If you are uncertain about errors and their handling, contact
Brooks Product Support, see Customer Service. Have the
serial number of the RFID reader ready as shown on the label
(see
Device Label) when contacting Brooks Product
Support!
To Next Page
Loading...