Brooks RFP6 - Page 16

BROOKS AUSTRALIA RFP6 Installer ISSUE 4
16
Smoke/Heat Alarms : Remote indication output - latching or non
(Refer to jumper latching.
set up Fig. 6) Standalone or common alarm operation
Panel Features : Common or independent zone operation
(Refer to Dip Switch Latching or non latching alarm indication
set up on Fig. 7) Alarm confirmation period:
0 Sec, 30 Sec or 60 Sec
Common Alarm Output latching or non latching
OPTIONS
Zone Output Card : 1 set C/NO/NC changeover dry contact per zone
1 set C/NO dry contact per zone
Mimic Panel : 24 Smoke/Heat Alarm indication or
48 Smoke/Heat Alarm indication or
72 Smoke/Heat Alarm indication
Cabling : 3 core 16/0.20 red sheath (standard)
4 core 16/0.20 red sheath (maximum options)
2 core 16/0.20 red sheath (for RIL or Mimic)