BROOKS AUSTRALIA RFP6 Installer ISSUE 4
26
4.3.2 Field Wiring
All field cabling is to be terminated on the Terminals provided as per Fig 6. The Figure
shows the conventional Block Wiring Diagram using 3 or 4 core cable for each zone
as per options selected.
Cables should be terminated as required. Ensure all cables are neat and secured
using approved plastic ties.
4.3.3 Battery
Fit Battery into bottom of enclosure.
RED - POSITIVE
BLACK - NEGATIVE
Using the mounting hardware provided, secure the front panel to the enclosure.
To Next Page
Loading...
